{"title":"OTHER THAN EARRING CUTTERS","description":"","products":[{"product_id":"crystal-ball-trinket-dish-clay-cutter","title":"CRYSTAL BALL | TRINKET DISH | CLAY CUTTER","description":"\u003cp\u003e\u003cstrong\u003eSize: 4in\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":42982689505468,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/7D11BA7A-23B5-4425-9275-8245243020F2.jpg?v=1744942656"},{"product_id":"luna-moth-moon-trinket-dish-clay-cutter","title":"LUNA MOON | TRINKET DISH | CLAY CUTTER","description":"\u003cp\u003eSize: 4.25 inch\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":42982691537084,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/ED71AB9C-118D-48F8-9DC0-92E7D0DE159F.jpg?v=1696694851"},{"product_id":"wavy-round-stanley-topper-clay-cutter","title":"Wavy Round Stanley Topper Clay Cutter","description":"","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009231651004,"sku":"","price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009231683772,"sku":"","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/9C14A3EC-1F21-43B6-B8B0-C377ECD2E9CE.jpg?v=1697413887"},{"product_id":"fat-frame-stanley-topper-clay-cutter","title":"Fat Frame Stanley Topper Clay Cutter","description":"\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009231978684,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009232011452,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/C4A64165-8391-4ACE-A98F-1903C8EBB3C4.jpg?v=1697413969"},{"product_id":"wavy-stanley-topper-clay-cutter","title":"Wavy Stanley Topper Clay Cutter","description":"","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009232142524,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009232175292,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/4AB1E484-DF62-41F0-BC02-F175FE0CAA1C.jpg?v=1697414032"},{"product_id":"tree-stanley-topper-clay-cutter","title":"Tree Stanley Topper Clay Cutter","description":"","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009232273596,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009232306364,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/AE3A76D7-291B-4629-9E59-9D644001B9BC.jpg?v=1697414109"},{"product_id":"moon-stanley-topper-clay-cutter","title":"Moon Stanley Topper Clay Cutter","description":"","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009232535740,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009232568508,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/0EF0EC14-CFC6-4B9D-8AA0-333DFA820326.jpg?v=1697414169"},{"product_id":"cow-tag-stanley-topper-clay-cutter","title":"Cow Tag Stanley Topper Clay Cutter","description":"\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009234272444,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009234305212,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/F7717401-2C4D-4AB4-8083-296019EC7F3F.jpg?v=1697414305"},{"product_id":"cactus-stanley-topper-clay-cutter","title":"Cactus Stanley Topper Clay Cutter","description":"\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009235189948,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009235222716,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/8362812E-9408-4FEC-998A-3BD109EDF5C4.jpg?v=1697414654"},{"product_id":"aztec-stanley-topper-clay-cutter","title":"Aztec Stanley Topper Clay Cutter","description":"\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009235484860,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009235517628,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/855A6F74-E928-44F3-8FFA-86706341920C.jpg?v=1697414714"},{"product_id":"aztec-cut-out-stanley-topper-clay-cutter","title":"Aztec Cut-out Stanley Topper Clay Cutter","description":"\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"40oz","offer_id":43009235583164,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"30oz","offer_id":43009235615932,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/73BE15CD-E19E-4E6A-8578-DF259397E6DC.jpg?v=1697414758"},{"product_id":"oriental-cloud-trinket-dish-clay-cutter","title":"ORIENTAL CLOUD TRINKET DISH CLAY CUTTER","description":"Size 4.5 inch","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":43125428814012,"sku":"","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/IMG_8940.jpg?v=1700698635"},{"product_id":"msand-dollar-tribket-dish-summer-sea-life-clay-cutters","title":"SAND DOLLAR | TRINKET DISH | CLAY CUTTER","description":"\u003cp\u003e\u003cstrong\u003eSize: 4.25 inch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e• Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":43425804320956,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/750CF338-600A-41E1-8053-47AB48649D68.jpg?v=1741962845"},{"product_id":"daisy-peace-sign-trinket-dish-clay-cutter","title":"DAISY PEACE SIGN | TRINKET DISH | CLAY CUTTER","description":"\u003cp\u003e\u003cstrong\u003eSize: 4 inch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":43617605189820,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/FA7887EC-FAC6-4CF3-AE5B-D8B723A33F23.jpg?v=1713203539"},{"product_id":"im-here-disk-clay-cutters","title":"I'm Here! | Disk Clay Cutters","description":"\u003cp\u003eSize: 4 inch diameter disk with blank space for new parents to enter new baby information with a sharpie.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":43906645786812,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/ADB5CF50-5F0C-4848-AD33-C5797D588996.jpg?v=1718379198"},{"product_id":"hello-world-arch-disk-clay-cutters","title":"Hello World Arch | Disk Clay Cutters","description":"\u003cp\u003e\u003cstrong\u003eSize: 4 inch arch with blank space for new parents to enter new baby information with a sharpie.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":43906653880508,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/4F11CDE5-E193-4691-9B04-44A3B03C7AE0.jpg?v=1718379146"},{"product_id":"shhh-sleeping-baby-arch-sign-clay-cutter","title":"Shhh Sleeping Baby Arch | Sign Clay Cutter","description":"\u003cp\u003e5in arch sign with 2 options for design.\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Just One Design","offer_id":43906666561724,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"2 Piece Design","offer_id":43906666594492,"sku":"","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/C06BC5D3-A556-418E-AC87-A48AC00071BD.jpg?v=1718380662"},{"product_id":"boho-oval-baby-milestone-disk-clay-cutters","title":"BoHo Oval Baby Milestone | Disk \u0026 Number Clay Cutters","description":"\u003cp\u003e\u003cstrong\u003eSize: 4in\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComes with 2 oval disks \"month\" and \"months\" and a 9 piece number cutter set. The 6 is also the 9.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":43906712338620,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/6BE04AAD-A603-4F15-AC15-D7043D295CD8.jpg?v=1718378734"},{"product_id":"babys-first-milestone-disk-clay-cutters","title":"Babys FIRST HOLIDAY Milestone | Disk Clay Cutters","description":"\u003cp\u003e\u003cstrong\u003eSize: 4in disk cutters. Available individually or a bundle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"FIRST CHRISTMAS","offer_id":43906917400764,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST HANUKKAH","offer_id":43906917433532,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST THANKGIVING","offer_id":43906917466300,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST EASTER","offer_id":43906917499068,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST 4TH OF JULY","offer_id":43906917531836,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST MEMORIAL DAY","offer_id":43906917564604,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST MOTHERS DAY","offer_id":43906917597372,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST FATHERS DAY","offer_id":43906917630140,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST  HALLOWEEN","offer_id":43906917662908,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST NEW YEAR","offer_id":43906917695676,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST VALENTINES DAY","offer_id":43906917728444,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST ST. PATRICKS DAY","offer_id":43906917761212,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"FIRST CANADA DAY","offer_id":43907280961724,"sku":"","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/BA1CA4C8-D2D0-4E02-BF8E-4A92FACA9375.jpg?v=1718401293"},{"product_id":"clean-dishes-dirty-dishes-disk-clay-cutters","title":"Clean Dishes | Dirty Dishes Disk Clay Cutters","description":"\u003cp\u003e4 inch disk for the perfect dishwasher magnet!\u003c\/p\u003e\n\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":43907283189948,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/F9F00C60-6F2F-4F63-85FE-FCC624EBFE87.jpg?v=1718401700"},{"product_id":"us-state-ornament-cookie-cutter-clay-cutter","title":"US STATE | ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnaments are 3 inch and HOME stamp is sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNOTE- State shapes varies in size so if your state is more open, select the LARGE stamp, if your state doesn't have much space, select the SMALL stamp.  (example, MD, DE, RI, NH, NJ)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"ALABAMA","offer_id":44059154088124,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"ALASKA","offer_id":44059154153660,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"ARIZONA","offer_id":44059154219196,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"ARKANSAS","offer_id":44059154284732,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"CALIFORNIA","offer_id":44059154350268,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"COLORADO","offer_id":44059154415804,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"CONNECTICUT","offer_id":44059154481340,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"DELAWARE","offer_id":44059154546876,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"FLORIDA","offer_id":44059154612412,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"GEORGIA","offer_id":44059154677948,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"HAWAII - PIECES","offer_id":44059154743484,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"HAWAII - SQUARED","offer_id":44059154776252,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"IDAHO","offer_id":44059154809020,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"ILLINOIS","offer_id":44059154874556,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"INDIANA","offer_id":44059154940092,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"IOWA","offer_id":44059155005628,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"KANSAS","offer_id":44059155071164,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"KENTUCKY","offer_id":44059155136700,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"LOUISIANA","offer_id":44059155202236,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MAINE","offer_id":44059155267772,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MARYLAND","offer_id":44059155333308,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MASSACHUSETTS","offer_id":44059155398844,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MICHIGAN","offer_id":44059155464380,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MINNESOTA","offer_id":44059155529916,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MISSISSIPPI","offer_id":44059155595452,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MISSOURI","offer_id":44059155660988,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MONTANA","offer_id":44059155726524,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NEBRASKA","offer_id":44059155792060,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NEVADA","offer_id":44059155857596,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NEW HAMPSHIRE","offer_id":44059155923132,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NEW JERSEY","offer_id":44059155988668,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NEW MEXICO","offer_id":44059156054204,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NEW YORK","offer_id":44059156119740,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NORTH CAROLINA","offer_id":44059156185276,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"NORTH DAKOTA","offer_id":44059156250812,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"OHIO","offer_id":44059156316348,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"OKLAHOMA","offer_id":44059156381884,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"OREGON","offer_id":44059156447420,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"PENNSYLVANIA","offer_id":44059156512956,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"RHODE ISLAND","offer_id":44059156578492,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"SOUTH CAROLINA","offer_id":44059156644028,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"SOUTH DAKOTA","offer_id":44059156709564,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"TENNESSEE","offer_id":44059156775100,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"TEXAS","offer_id":44059156840636,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"UTAH","offer_id":44059156906172,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"VERMONT","offer_id":44059156971708,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"VIRGINIA","offer_id":44059157037244,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"WASHINGTON","offer_id":44059157102780,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"WEST VIRGINIA","offer_id":44059157168316,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"WISCONSIN","offer_id":44059157233852,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"WYOMING","offer_id":44059157299388,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"HOME STAMP - LARGE","offer_id":44059997241532,"sku":"","price":5.0,"currency_code":"USD","in_stock":true},{"title":"HOME STAMP - SMALL","offer_id":44059997307068,"sku":"","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/97B363D4-9FBC-4B66-B80D-390191677633.jpg?v=1723171156"},{"product_id":"other-countries-cookie-cutter-clay-cutter","title":"COUNTRIES | ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament cutters are 3 inch.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eIF YOU ARE REQUESTING A COUNTRY I DO NOT HAVE LISTED, PLEASE PLEASE PLEASE PUT YOUR REQUEST IN NOTES OF YOUR ORDER!!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNOTE- Country shapes varies in size so if your state is more open, select the LARGE stamp, if your country doesn't have much space, select the SMALL stamp. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"AUSTRALIA","offer_id":44059093041340,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"IRELAND","offer_id":44059093074108,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"SPAIN","offer_id":44059093106876,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"CANADA","offer_id":44059093139644,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"ONTARIO","offer_id":44059093172412,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"FINLAND","offer_id":44059093205180,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"CUSTOM COUNTRY ORNAMENT","offer_id":44059093237948,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"HOME STAMP - LARGE","offer_id":44060017557692,"sku":"","price":5.0,"currency_code":"USD","in_stock":true},{"title":"HOME STAMP - SMALL","offer_id":44060017590460,"sku":"","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/39F8B8EA-4F50-4577-8AF9-CCDEA43339BB.jpg?v=1723174588"},{"product_id":"planchette-ornament-dark-christmas-clay-cutter","title":"PLANCHETTE ORNAMENT | DARK CHRISTMAS | CLAY CUTTER","description":"\u003cp\u003e\u003cstrong\u003eOrnament size is 3.25in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e• Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"PLANCHETTE \u0026 STAMP COMBO","offer_id":44059228569788,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true},{"title":"SUMMONING STAMP ONLY","offer_id":44059228602556,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"PLANCHETTE CUTTER ONLY","offer_id":44059243970748,"sku":"","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/AE6F9D04-D94F-4EEC-B325-96A9C2E57B15.jpg?v=1723171626"},{"product_id":"skull-snowflae-ornament-dark-christmas-clay-cutter","title":"SKULL SNOWFLAKE ORNAMENT | DARK CHRISTMAS | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059247149244,"sku":null,"price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/94CF18EA-A2F4-494D-B654-6B4260C63A70.jpg?v=1723171662"},{"product_id":"krampus-bell-ornament-dark-christmas-clay-cutter","title":"KRAMPUS BELL ORNAMENT | DARK CHRISTMAS | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3in. \u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059260190908,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/307ED4FB-B3BE-4348-A258-048CC7DB6316.jpg?v=1723171639"},{"product_id":"f-ck-ornament-dark-christmas-clay-cutter","title":"F*CK EARRING + ORNAMENT | INPPROPRIATE | CHRISTMAS | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. and Earring size is 1.5in\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"EARRING 1.5in","offer_id":45135752134844,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"ORNAMENT 3.25in","offer_id":45135752167612,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/76D49518-13AE-4D6E-9990-2B38D1A3CF29.jpg?v=1723171593"},{"product_id":"snowflake-dark-christmas-clay-cutter","title":"NORDIC SNOWFLAKE ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059287224508,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/D8F90A97-A2EC-4D66-B23F-0ABAF88B42B1.jpg?v=1723171577"},{"product_id":"wide-vintage-ornament-dark-christmas-clay-cutter","title":"WIDE VINTAGE ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 4in.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059292827836,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/3CF5AD15-77FA-4871-9E80-4F9E62D73B45.jpg?v=1723171555"},{"product_id":"long-vintage-ornament-dark-christmas-clay-cutter","title":"LONG VINTAGE ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 4in.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059295973564,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/B4895D7B-CF54-40FE-853B-875B1639A780.jpg?v=1723171530"},{"product_id":"reindeer-jumping-ornament-clay-cutter","title":"REINDEER JUMPING ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.5in.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059299086524,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/B913E5BF-2064-4815-867D-B0EE37C92B15.jpg?v=1723171356"},{"product_id":"heart-donut-ornament-clay-cutter","title":"HEART DONUT ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059307278524,"sku":null,"price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/C80204F0-5B52-4F29-8D48-A83CEFFB3058.jpg?v=1723171506"},{"product_id":"moroccan-ornament-clay-cutter","title":"MOROCCAN ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059311603900,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/DE37A812-14CD-4341-9F2D-E495739573FC.jpg?v=1723171098"},{"product_id":"bubble-thin-ornament-clay-cutter","title":"BUBBLE THIN ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in\u003c\/p\u003e\n\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059315470524,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/9F33743E-532B-41D4-B4FC-BF12A3C138BA.jpg?v=1723171431"},{"product_id":"bubble-fat-ornament-clay-cutter","title":"BUBBLE FAT ORNAMENT | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in\u003c\/p\u003e\n\u003cp\u003eThis set comes as a mirrored set.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44059316781244,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/B47E5D84-CA5E-461B-9206-FC7B0F0373D3.jpg?v=1723171382"},{"product_id":"zombie-gingerbread-man-ornament-dark-christmas-clay-cutter","title":"ZOMBIE GINGERBREAD MAN ORNAMENT | DARK CHRISTMAS | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3in. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44060040954044,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/9C1B31E0-9998-4950-8318-BC854313E879.jpg?v=1723172557"},{"product_id":"holiday-gift-tag-bundle-of-5-christmas-clay-cutters","title":"HOLIDAY GIFT TAG BUNDLE OF 5 | CHRISTMAS | CLAY CUTTERS","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eTHIS IS A BUNDLE OF 5 TAG CUTTERS.\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSize 2.5in\u003c\/p\u003e\n\u003cp\u003eTag transfer paper sold separately. Paper has 8 tag images with subtle snowflake background.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Cutter Bundle Only","offer_id":44074097443004,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Transfer Paper","offer_id":44074097475772,"sku":"","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/A2A32BFE-C6EB-4C39-BF0B-787FE9FF2900.jpg?v=1723852136"},{"product_id":"wreath-christmas-trinket-dish-clay-cutter","title":"WREATH DISH | CHRISTMAS | TRINKET DISH | CLAY CUTTER","description":"\u003cp\u003e\u003cstrong\u003eSize: 4.25 inch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44097862664380,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/54BBFF63-29F1-4445-9371-DA5CEB096505.jpg?v=1725053184"},{"product_id":"santa-claus-christmas-trinket-dish-clay-cutter","title":"SANTA CLAUS DISH | CHRISTMAS | TRINKET DISH | CLAY CUTTER","description":"\u003cp\u003e\u003cstrong\u003eSize: 4.25 inch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44097864237244,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/4D7E9495-38E3-460A-9D93-9DB7FF54A93C.jpg?v=1725053147"},{"product_id":"cupcake-nutcracker-christmas-trinket-dish-clay-cutter","title":"CUPCAKE NUTCRACKER DISH | CHRISTMAS | TRINKET DISH | CLAY CUTTER","description":"\u003cp\u003e\u003cstrong\u003eSize: 4.25 inch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44097864499388,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/A0868CBD-D16C-45F4-899C-E98ACB64F8F5.jpg?v=1725053122"},{"product_id":"i-saw-that-ornament-inappropriate-clay-cutter","title":"“I SAW THAT” ORNAMENT | INAPPROPRIATE | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44157522510012,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/AB8DE802-9278-4533-9798-76453947FBE2.jpg?v=1727705052"},{"product_id":"featuve-as-f-ck-ornament-inappropriate-clay-cutter","title":"FESTIVE AS F*CK ORNAMENT | INAPPROPRIATE | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e\n\u003c!----\u003e","brand":"Prism Clay Co.","offers":[{"title":"Ornament 3.25in","offer_id":45075894599868,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Earring 1.5in","offer_id":45075894632636,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/656E9457-EDF5-4356-B403-12265B04A2C6.jpg?v=1727700114"},{"product_id":"merry-kissmyass-ornament-inappropriate-clay-cutter","title":"MERRY KISSMYASS ORNAMENT | INAPPROPRIATE | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003cbr\u003eEarring cutter size is 1.75in.\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"ORNAMENT","offer_id":44157524115644,"sku":"","price":12.0,"currency_code":"USD","in_stock":true},{"title":"EARRING","offer_id":44157524148412,"sku":"","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/2764680D-65EF-4CC3-957A-4F2A4200B0C4.jpg?v=1727700051"},{"product_id":"bah-f-cking-humbug-ornament-inappropriate-clay-cutter","title":"BAH F*CKING HUMBUG ORNAMENT | INAPPROPRIATE | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003cbr\u003eEarring cutter size is 1.5in.\u003c\/p\u003e\n\u003cp\u003ePlease see photos for size reference. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"ORNAMENT","offer_id":44157523722428,"sku":"","price":12.0,"currency_code":"USD","in_stock":true},{"title":"EARRING","offer_id":44157523755196,"sku":"","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/149E3454-5141-4A06-94CB-844D55E86AC2.jpg?v=1727700026"},{"product_id":"middle-finger-ornament-inappropriate-clay-cutter","title":"MIDDLE FINGER ORNAMENT | INAPPROPRIATE | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003cbr\u003eEarring cutter size is 1.75in\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"ORNAMENT","offer_id":44157524443324,"sku":"","price":12.0,"currency_code":"USD","in_stock":true},{"title":"EARRING","offer_id":44157524476092,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MIRRORED EARRING SET","offer_id":44157524508860,"sku":"","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/IMG-4339.jpg?v=1744935502"},{"product_id":"middle-finger-f-ck-you-ornament-inappropriate-clay-cutter","title":"MIDDLE FINGER “F*CK YOU* ORNAMENT | INAPPROPRIATE | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44157522903228,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/2164C56E-6AB7-4C9D-B2B3-72D6725E0009.jpg?v=1741963489"},{"product_id":"gotcha-ornament-inappropriate-clay-cutter","title":"“GOTCHA” ORNAMENT | INAPPROPRIATE | CLAY CUTTER","description":"\u003cp\u003eOrnament size is 3.25in. \u003cbr\u003eEarring cutter size is 1.75in. and includes NO words!\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e•  Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Also, don't forget to tag me in your creations so I can reshare!\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"ORNAMENT","offer_id":44157525131452,"sku":"","price":12.0,"currency_code":"USD","in_stock":true},{"title":"EARRING","offer_id":44157525164220,"sku":"","price":8.0,"currency_code":"USD","in_stock":true},{"title":"MIRRORED EARRING SET","offer_id":44157525196988,"sku":"","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/6BAC2282-1787-473D-A5BA-2BAAF3103EE9.jpg?v=1727705033"},{"product_id":"fox-standing-wall-art-large-clay-cutter","title":"WALL ART | FOX STANDING | SCANDINAVIAN | LARGE CLAY CUTTER","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTHIS IS A LARGE CUTTER\u003c\/span\u003e, \u003cem\u003e\u003cstrong\u003eNOT EARRING SIZED\u003c\/strong\u003e\u003c\/em\u003e. MEANT FOR A WALL HANGING, TRINKET DISH OR OTHER LARGER CREATIONS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eSIZE 4.75IN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e• Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Follow me and don't forget to tag me in your creations so I can share!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44434836193468,"sku":"","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/7100644D-3E7A-4548-A6C9-49134EF47E8B.jpg?v=1736381108"},{"product_id":"wall-art-fox-head-scandinavian-large-clay-cutter","title":"WALL ART | FOX HEAD | SCANDINAVIAN | LARGE CLAY CUTTER","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTHIS IS A LARGE CUTTER\u003c\/span\u003e, \u003cem\u003e\u003cstrong\u003eNOT EARRING SIZED\u003c\/strong\u003e\u003c\/em\u003e. MEANT FOR A WALL HANGING, TRINKET DISH OR OTHER LARGER CREATIONS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eSIZE 5IN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e• Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Follow me and don't forget to tag me in your creations so I can share!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44434837176508,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/9205A5DB-961B-44C0-BBFB-5BC0A01D4AF2.jpg?v=1736381509"},{"product_id":"wall-art-unicorn-round-scandinavian-large-clay-cutter","title":"WALL ART | UNICORN ROUND | SCANDINAVIAN | LARGE CLAY CUTTER","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTHIS IS A LARGE CUTTER\u003c\/span\u003e, \u003cem\u003e\u003cstrong\u003eNOT EARRING SIZED\u003c\/strong\u003e\u003c\/em\u003e. MEANT FOR A WALL HANGING, TRINKET DISH OR OTHER LARGER CREATIONS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eSIZE 4.75IN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e• Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Follow me and don't forget to tag me in your creations so I can share!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44434837831868,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/D9431C3A-E23D-41E3-B5AB-570C3076CEF3.jpg?v=1736381206"},{"product_id":"wall-art-unicorn-love-scandinavian-large-clay-cutter","title":"WALL ART | UNICORN LOVE | SCANDINAVIAN | LARGE CLAY CUTTER","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTHIS IS A LARGE CUTTER\u003c\/span\u003e, \u003cem\u003e\u003cstrong\u003eNOT EARRING SIZED\u003c\/strong\u003e\u003c\/em\u003e. MEANT FOR A WALL HANGING, TRINKET DISH OR OTHER LARGER CREATIONS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eSIZE 4.75IN\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese sharp and sturdy polymer clay cutters effortlessly slice through clay, ensuring clean, precise shapes with every use. \u003c\/p\u003e\n\u003cp\u003eCutters are 3D printed with biodegradable PLA, this product is environmentally friendly and will last for years if used, cleaned, and stored properly. PLA colors may vary based on what I have in stock at time of printing.\u003c\/p\u003e\n\u003cp\u003eThis is a physical product, not a STL file.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER SIZE\u003c\/strong\u003e\u003cbr\u003e• Cutters are measured from the length of the longest edge.\u003cbr\u003e• Cutter height is .5in \/ 1.5cm \/ 11mm\u003cbr\u003e• Cutting edges vary between .2-.4mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW TO USE\u003c\/strong\u003e\u003cbr\u003e• Roll clay slab on a glossy, flat surface such as a glass or ceramic tile.\u003cbr\u003e• Highly suggest using cornstarch over soapy water (soapy water breaks down PLA material)\u003cbr\u003e• Use \"double press\" method to get a clean cut and avoid clay sticking in cutter\u003cbr\u003e• Tap into cornstarch, press half way into clay and release. Tap into cornstarch a second time, press all the way through clay, wiggle slightly if needed and release.\u003cbr\u003e• Dust off excess cornstarch with soft bristle brush such as a blush brush.\u003cbr\u003e• Bake per clay instructions {I personally bake at 275 degrees for 45-60minutes for a strong finished product}\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCUTTER CARE\u003c\/strong\u003e\u003cbr\u003e• Hand-wash gently with cool water. DO NOT SOAK!\u003cbr\u003e• Store in a cool dry place\u003cbr\u003e• Do not expose to heat or direct sunlight\u003cbr\u003e• NOT dishwasher, microwave or oven safe!!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eI invite you to visit my Instagram @prismclayco for my daily updates, tips and tricks. Follow me and don't forget to tag me in your creations so I can share!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Clay Co.","offers":[{"title":"Default Title","offer_id":44434838421692,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/files\/E070763F-F21B-468D-BAE3-617BC1619AF0.jpg?v=1736381495"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0594\/4095\/5580\/collections\/hOUSE_pLANTS_47.png?v=1780367058","url":"https:\/\/prismclayco.com\/collections\/design-tools.oembed?page=5","provider":"Prism Clay Co.","version":"1.0","type":"link"}